oem electric fence insulators
"We could not find any products that match your search. Please try a different keyword or browse our categories.
HDL105B 745g Electric Fence Gate Kit With Handle Pin Lock Insulators And 5m Spring
HDL105B Electric Fence Gate Kit With Pin Lock Insulators And 5m Spring The HDL105B is an electric fence gate kit fitted with pin lock insulators for a fixed, secure gate end. It includes a wide-handle gate (HDL005T), a pin lock insulator (INS072B), a pin lock insulator with a 3-hole plate and wire ...
HDL009Y 147g Yellow Electric Fence Gate Handle With 165mm Grip And 18mm Spring
HDL009Y Yellow Electric Fence Gate Handle - 165mm Grip, 147g The HDL009Y is a yellow electric fence gate handle with an extra-long 165mm insulated grip for firm, comfortable handling. A 5mm galvanized top hook and an 18mm galvanized spring connect it to the gate, and the Dia 60x250mm impact...
HDL003Y Yellow Insulated Electric Fence Gate Handle With Galvanized Hook 187g
HDL003Y Insulated Electric Fence Gate Handle - Yellow, 187g The HDL003Y is a yellow insulated gate handle for electric fence lines. It combines a supportive plastic grip with safety flanges and a galvanized hook and spring, giving a safe, controlled way to open and close a live gate. At 187g with a ...
EFA038-00 Dacromet Joint Clamp Wire Connector With M8x20mm Bolt For Fence Wires
EFA038-00 Dacromet Joint Clamp Wire Connector With M8x20mm Bolt The EFA038-00 is a wire connector built around a high-standard Dacromet-coated clamp and an M8x20mm bolt, washer and nut. It joins electric fence wire up to 3mm and locks the joint down tightly so resistance stays low. The Dacromet ...
M10 Thread Aluminum Split Bolt Joint Clamp For Electric Fence Wire Up To 2.7mm
M10 Thread Aluminum Split Bolt Joint Clamp For Electric Fence Wire This M10 thread joint clamp is an aluminum connector that secures electric fence wire up to 2.7mm in diameter. Its split bolt design, tightened by two nuts, presses the wire firmly into the aluminum body to give a strong, conductive ...
JON011 Galvanized Steel Polytape Splicer End Buckle For Electric Fence Hardware
JON011 Galvanized Steel Polytape Splicer And End Buckle The JON011 is a galvanized steel splicer and end buckle developed for electric fence hardware. It both terminates the end of a polytape run and joins two tape sections, giving installers one component for finishing and extending a fence. The ...
JON013 6g Galvanized Steel 2.5mm Poly Tape Splicer For Farm Electric Fencing
JON013 Galvanized Steel 2.5mm Polytape Splicer - 6g The JON013 is an ultra-light 6g galvanized steel splicer made to connect 2.5mm electric fence polytape cleanly. Its slim profile clips onto the tape and clamps down to form a strong conductive joint, letting farmers repair a torn tape or join two ...
Round Fiberglass L1220mm Electric Fence Posts For Garden
The Round L1220 mm fibreglass electric fence post is built for gardens and light farm use. Its 10 mm fibreglass reinforced body with a pointed tip drives in cleanly and offers an insulating, nearly unlimited service life. Key Features Fibreglass reinforced polyester resin gives a very long service ...
